Producs - Nano Dünya

E-413.2 - E-413.6 Multi-Channel Piezo Amplifier

For Piezo Tubes and PICA Shear Actuators

Low-noise piezo amplifier
Peak power up to 50 W
Bipolar operation
Output voltage -250 to 250 V
Ideally adapted for scanner tubes
Output voltage monitoring

E-413.30 piezo amplifier

E-413.20, .30, .41, .61: dimensions in mm

E-413.20, .30, .41, .61: Operating limits (open loop) with various piezo loads, capacitance values in nF

Product Description Description Specifications Downloads Quote/Order

Piezo tube ("scanner tube") control

Depending on the version, the E-413 amplifier can control a piezo tube in two or three directions of motion. The possible directions of motion of a piezo tube depend on the number of its electrode segments.

Voltage range and control signal

Low noise and precision in static and dynamic operation. Peak currents up to 100 mA per channel at -250 to +250 V. Output voltage control via analog input signal -10 to +10 V with gain value of 25. Control signal generation possible with PC via D/A converter and PI driver set for use with NI LabVIEW software.

Scope of delivery

Delivery includes 24 V wide input range power supply.

Control of up to six piezo actuators

The amplifier is also available as a version for controlling up to six individual piezo actuators with bipolar operating voltage such as PICA Shear or Picoactuator®.

Interfaces

Control signals, monitor signals: SMB. Voltage outputs: D-sub 15 (f)

	E-413.30 / .20	E-413.61 / .41
Function	Piezo amplifier for scanner tubes	Piezo amplifiers for PICA Shear, Picoactuator®
Channels	3 / 2 There are two outputs for each channel. The second output always outputs the voltage of the first output with reversed sign ("inverted").	6 / 4

Amplifier	E-413.30 / .20	E-413.61 / .41
Input voltage range	-10 to 10 V	-10 to 10 V
Output voltage	-250 to 250 V Inverted output: 250 to -250 V	-250 to 250 V
Output voltage monitoring	-2.5 to 2.5 V Inverted output: 2.5 to -2.5 V	-2.5 to 2.5 V
Peak output power/output (<1 ms)	50 W	50 W
Average output power/output	>10 W	>10 W
Peak current/output (<1 ms)	100 mA	100 mA
Average output current/output	>20 mA	>20 mA
Current limitation	Short-circuit proof	Short-circuit proof
Voltage gain	25 ±0.1 Inverted output: -25 ±0.1	25 ±0.1
Bandwidth, small signal	≥20 kHz	≥20 kHz
Ripple, noise, 0 to 10 kHz	<1 mV_rms 5 mV_pp <200 µV_rms at <10 kHz bandwidth, 100 nF actuator load at the output	<1 mV_rms 5 mV_pp <200 µV_rms at <10 kHz bandwidth, 100 nF actuator load at the output
Capacitive base load (internal)	2 nF	2 nF
Sensible external actuator capacity	>2 nF	>2 nF
Output impedance	1 kΩ, 2 nF	1 kΩ, 2 nF
Input impedance	100 kΩ	100 kΩ

Interfaces and operation	E-413.20, .30, .41, .61
Piezo connector	D-sub 15 (f)
Analog input	SMB plug connector
Monitor output	SMB plug connector

Miscellaneous	E-413.20, .30, .41, .61
Operating temperature range	5 to 40 °C
Dimensions	320 mm × 200 mm × 60 mm
Mass	1.5 kg
Operating voltage	24 V / 4 A ±2 %, in the scope of delivery: External power adapter
Current consumption	Maximum load approx. 3 A No load approx. 750 mA

Datasheet

Datasheet E-413.2-6

Version / Date

2019-05-08
pdf - 337 KB

Download

Documentation

Short Instruction PZ300

Housed Analog Piezo Electronics E-4xx, E-5xx, E-6xx, E-8xx

Version / Date

1.1.0 04/2021
pdf - 1 MB

Download

Documentation

User Manual PZ296

E-413.30, .20, .6x, .4x Piezo Amplifier

Version / Date

1.2.0 2019-05-08
pdf - 845 KB

Add to List Remove from List

E-413.20

Piezo amplifier for segmented tubes, 2 channels, -250 to 250 V, D-sub 15 socket